Resources
Everything we publish for plant engineers, buyers and operators — guides, topic indexes, service information and certifications. Filter it, or search straight to what you need.
Resource library
Latest guides
Electrolyzer Cooling Heat Exchanger: Plate Selection for PEM and Alkaline StacksElectrolyzer cooling heat exchanger selection for PEM and alkaline stacks: heat load, purity limits, copper-free materials and heat recovery options.
IQF Freezer Heat Exchanger: Glycol Loop Design for Individual Quick FreezingHow to size an IQF freezer heat exchanger: heat load from throughput, the glycol-ammonia temperature stack, materials and approach temperature.
Solar Thermal Heat Exchanger: Sizing the Collector Loop and Storage TankA solar thermal heat exchanger sets collector inlet temperature and annual yield. Sizing rules, approach temperature and glycol limits for solar systems.
Plate and Shell Heat Exchanger: When It Beats Gasketed Plate and Shell and TubeA plate and shell heat exchanger combines round-plate efficiency with welded pressure containment. Learn when it beats gasketed plate and shell and tube.
Geothermal Heat Pump Heat Exchanger: Ground Loop Selection GuideGeothermal heat pump heat exchanger selection: glycol viscosity, approach temperature penalty, plate versus shell and tube, and the pressure drop budget.
Thermal Oil Heat Exchanger Design: Selection Guide for Hot Oil SystemsThermal oil heat exchanger selection guide: oil velocity, film temperature, expansion case and the shell and tube versus plate decision at 250-320 C.
Air Cooled Condenser Sizing: Matching Heat Rejection for Cold Storage and RefrigerationAir cooled condenser sizing explained: total heat rejection, design temperature difference, ambient and altitude corrections, and coil choice.
MVR Falling Film Evaporator: Heat Exchanger Selection for Zero Liquid DischargeHow an MVR falling film evaporator sizes its heat exchanger: effective temperature difference, compressor lift, specific energy and materials.
Cryogenic Heat Exchanger for LNG: Choosing the Right Vaporizer TypeHow to specify a cryogenic heat exchanger for LNG: vaporizer types, low-temperature materials, thermal shock limits and the key datasheet numbers.
Hydraulic Oil Cooler Selection: Sizing, Air-Cooled vs Water-CooledHydraulic oil cooler selection for industrial systems: estimate heat load, choose air or water cooling, size by LMTD and protect against cold-start damage.
Biogas Digester Heating Heat Exchanger: Selection Guide for Anaerobic DigestionChoose a biogas digester heating heat exchanger that holds 35-40C through winter: duty calculation, exchanger type, struvite fouling and materials.
High Temperature Industrial Heat Pump for 90°C Steam: Selection and PaybackSpecify a high temperature industrial heat pump for 90C steam: temperature lift, refrigerant choice, load profiling and payback modelling for plant engineers.
Compressed Air Aftercooler Selection: Air-Cooled or Water-Cooled?A compressed air aftercooler removes 70-90% of compressor heat. How to size the duty, choose air-cooled or water-cooled, and keep pressure drop low.
Titanium Seawater Heat Exchanger vs Cupronickel: Marine Cooling GuideA titanium seawater heat exchanger survives the chlorides that destroy stainless steel. Compare titanium, cupronickel and duplex, and set velocity limits.
Data Center Liquid Cooling Heat Exchanger: CDU Selection GuideA data center liquid cooling heat exchanger sets the approach temperature, pressure drop and coolant quality a CDU loop can hold. How to specify it right.
Flue Gas Heat Exchanger Design: Recovering Boiler Stack Heat Without Acid CorrosionHow to design a flue gas heat exchanger that recovers boiler stack heat safely: acid dew point limits, condensing vs non-condensing, tube geometry.
Sanitary Plate Heat Exchanger for Dairy and Food Processing: Selection GuideHow to specify a sanitary plate heat exchanger for dairy and food lines: hygiene standards, CIP compatibility, plate and gasket materials, regeneration.
Chilled Water Plate Heat Exchanger: Selection Guide for HVAC PlantsHow to select a chilled water plate heat exchanger for HVAC plants: duty data, approach temperature, pressure drop, fouling and free-cooling checks.
Ammonia Refrigeration Heat Exchanger Selection: Plates vs Shell and TubeHow to select an ammonia refrigeration heat exchanger: plate versus shell and tube, charge reduction, copper-free materials and correct gasket choice.
Shell and Tube Heat Exchanger for Steam: Sizing and Selection GuideSizing a shell and tube heat exchanger for steam: LMTD, U-values, surface margin, condensate drainage and steam trap selection for reliable steam duty.
TEMA Shell and Tube Heat Exchanger Types: BEM vs BEU vs AES ExplainedBEM, BEU, AES or AEW? Compare TEMA shell and tube heat exchanger types and learn which rear head suits dirty service, high pressure or high temperature.
Heat Exchanger Cleaning vs Replacement: How to Run the Break-Even NumbersWork out when heat exchanger cleaning stops being economic and replacement wins, using the energy penalty, cleaning trend and break-even cost calculation.
Heat Exchanger Tube Material Selection: Carbon Steel to TitaniumCompare heat exchanger tube materials from carbon steel to titanium and duplex, with the chloride, temperature and velocity rules that decide the grade.
District Heating Substation Heat Exchanger Selection: The Three Numbers That MatterHow to select a district heating substation heat exchanger: approach temperature, pressure rating split and part-load turndown, with a specification checklist.
Heat Exchanger Tube Failure: Four Mechanisms and Inspection Intervals That Catch ThemThe four mechanisms behind heat exchanger tube failure, plus the inspection method that detects each and how to set a defensible inspection interval.
Plate Heat Exchanger Gasket Failure: Four Causes and How to Diagnose ThemDiagnose plate heat exchanger gasket failure: compression set, over-tightening, chemical attack and mechanical damage, with a plate pack inspection checklist.
Baffle Spacing in Shell and Tube Heat Exchangers: How to Specify It RightHow baffle spacing controls shell-side velocity, heat transfer and pressure drop in shell and tube heat exchangers, and how to specify it correctly.
Swimming Pool Heat Exchanger Sizing: A Guide for Commercial PoolsSwimming pool heat exchanger sizing step by step: heat-load calculation, titanium versus stainless selection, flow rates and a commercial pool checklist.
Dry Cooler vs Cooling Tower: Which Heat Rejection System Fits Your PlantDry cooler vs cooling tower compared on water use, leaving temperature, energy and maintenance, plus a selection checklist for plant engineers.
Industrial Heat Pump Payback Period: How to Model ROI for Process HeatModel the industrial heat pump payback period for process heat: duty, real COP, fuel and power tariffs, and the four costs a simple payback leaves out.
D1/D2 Pressure Vessel Certification: What Heat Exchanger Buyers Must VerifyD1/D2 pressure vessel certification explained: what the certificate covers, the documentation to demand, and how to verify a heat exchanger supplier.
CO2 Transcritical Heat Exchangers: Gas Cooler Selection for R744 SystemsCO2 transcritical heat exchanger selection: pressure ratings, gas cooler options and materials for reliable R744 refrigeration and heat pumps.
Chiller Heat Exchanger Selection: Choosing the Evaporator and CondenserChiller heat exchanger selection guide: sizing shell and tube or brazed plate evaporators and water-cooled condensers for reliable chiller duty.
Heat Exchanger Sizing Calculation: A Step-by-Step LMTD Guide for EngineersA practical heat exchanger sizing calculation: heat duty, LMTD, overall heat transfer coefficient and fouling factor, with a worked example and checklist.
Brazed Plate Heat Exchanger Selection: Brazed vs Gasketed for Heat Pumps and RefrigerationBrazed plate heat exchanger selection: compare brazed vs gasketed designs on pressure, refrigerants, cleaning and cost for heat pumps and refrigeration.
Dry Cooler for Data Center Cooling: Water-Free Heat Rejection and Free Cooling ExplainedA dry cooler for data center cooling delivers water-free heat rejection and free cooling. Compare dry coolers, cooling towers and chillers before you buy.
Waste Heat Recovery: How Factories Cut Energy Bills by Up to 30%Waste heat recovery economics explained: economizer payback worked example, recovery technologies, and corrosion design considerations.
Heat Pump vs Gas Boiler: Efficiency and Total Cost ComparisonHeat pump vs gas boiler compared: COP, operating cost, payback periods, and why the heat exchanger design decides the final efficiency.
Air Cooled Heat Exchangers (ACHE): Design, Benefits, and ApplicationsHow fin fan air cooled heat exchangers work, air vs water cooled trade-offs, design factors, and where ACHE is the right choice.
Heat Exchanger Fouling: Causes, Warning Signs, and Prevention StrategiesWhy heat exchangers foul, what it costs, warning signs to monitor, and design strategies that prevent scaling, biofilm and corrosion deposits.
How to Clean and Descale a Plate Heat Exchanger: Step-by-Step GuideComplete plate heat exchanger cleaning guide: CIP chemical circulation, safe mechanical cleaning, gasket inspection, and fouling prevention.
Shell and Tube vs Plate Heat Exchangers: Which Is Right for Your Application?Practical comparison of shell and tube vs plate heat exchangers: pressure limits, efficiency, maintenance, cost, and how to choose the right technology for your application.
Introduction: Why Understanding Heat Exchangers Matters If you have landed here searching for heat exchanger information, you have found the...
Plate heat exchangers (PHEs) are revered for their compact footprint and high thermal effectiveness, often achieving closer temperature approaches...
Not finding it?
Send our engineers the duty — fluid, flow rate, inlet and outlet temperatures — and we will size the exchanger and quote it.